喷油泵试验台功能介绍：

喷油泵试验台根据所调试的油泵，选用适当的附具，可进行如下项目的调试：

1测试不同转速下喷油泵的各缸供油量和供油均匀性。

2测试喷油泵的供油始点及供油间隔角度。

3调速器工作性能的检查及调整。

4压力补偿性能的测试及检查。

5分配泵工作性能的测试及调整。

6冷启动装置及电磁阀性能检查。

7分配泵各种转速下的回油量测量。

8分配泵各种转速下的内压测定。

9喷油泵密封性能实验。

10检查输油泵自吸功能。

11内置高可靠性卧式打气泵。

12三“T”型工作台、宽体定位支架，设备运转稳定 油泵试验台生产厂家 12PSB系列喷油泵实验试验台生产基地

※ 采用工业计算机标准，可靠性高

※ 按照“人机工程学”原则设计，布局合理，使用方便

※ 强电系统采用SSR固态继电器无触点控制，安全可靠

※ 上位机采用电子盘和DOS平台，抗震、耐冲击

※ 压力、温度、提前角等参数均为屏幕数显

The purpose of the pump test-bed

The oil pump of pump test-bed based on the debugging and selection of appropriate affix, debugging for the following projects:

1 testing the fuel injection pump under different rotation speed of each cylinder oil and oil supply uniformity.

2 test of the fuel injection pump fuel supply starting point and interval Angle oil.

3 speed governor and adjust the working performance of the inspection.

4 pressure compensation performance test and check.

5 distribution pump performance test and adjustment.

6 cold start device and electromagnetic valve performance examination.

7 allocated amount of oil pump under different rotation speed measurement.

8 distribution of internal pressure measurement of the pump under different rotation speed.

9 for fuel pump seal performance experiment.

10 check oil transfer pump self-priming function.

11 the built-in high reliability horizontal pump.

12 three "T" type workbench, wide-bodied positioning support, equipment operation stability

※