| 适用范围 Application Range | ||||
| 压力 Pressure [MPa] | 温度 Temperature [°C] | 速度 Sliding speed[m/s] | 介质Medium | |
| 标准件Standard | 35 | -30 ... +160 | 1.5 | 液压油、阻燃液、水、气 Mineral oil based hydraulic fluids, barely flammable hydraulic fluids, water, air and others. |
| 材料Material | ||
| O 圈 O ring | 滑环 slide ring | |
| 标准件Standard Design | NBR | PTFE-青铜 PTFE-Bronze |
| 特殊Special (on request) | FKM | PTFE-碳纤维 PTFE-carbon |
| 设计标准或互换件 Standard and /or can fit the groove |
| SPGO |
| 工作压力 Pressure | 160bar | 250bar | 400bar |
| 挤出间隙Max Gap E | E≤0.6mm | E≤0.4mm | E≤0.2mm |
订货范例Order Example for standard version:
缸径Diameter D = 100 mmSPGO 100*86*6.5
Installation Dimension table based on Metric Size
公制沟槽尺寸（mm）
缸径Diameter D = 100 mmSPGO 100*86*6.5
Installation Dimension table based on Metric Size
公制沟槽尺寸（mm）
| 缸径 D H9 | 沟槽底径 d-0.2 | h | H+0.2 | O型圈线径d1 | R1≤ |
| 20~50 | D-6 | 3 | 3.2 | 2.62 | 0.4 |
| 30~60 | D-8.5 | 3.8 | 4 | 3.55 | 0.8 |
| 63~160 | D-14 | 6.3 | 6.5 | 5.3 | 1.2 |
| 170~400 | D-20 | 9.8 | 10 | 8.6 | 1.6 |
| SPGO series also can be supplied with the following dimensions and type. | ||
| Chamfer type The standard type SPGO@DL has a small chamfer on both edges. More chamfer type-no chamfer and wide chamfer are available on request. | ||
| SPGO 系列也可提供以下的尺寸和类型 |
| 倒角类型 德龙标准的 SPGO 产品有 45°的小倒角，也可提供无倒角和宽倒角的产品 |
 |  |  |  | 侧面均压槽 |
| Standard (small) chamfer 标准小倒角 | No chamfer 无倒角 | Wide chamfer 宽倒角 | Standard type标准形形式 | |
| Angle slots on side faceThe standard type SPGO@DL doesn’t have slots on side face. More slottype-Angle slots and Straight slots on both side face type are available on request. | 侧面均压槽 德龙标准形式的 SPGO 产品没有侧面均压槽。可提供斜槽产品和直 槽产品 | Angle Slots 斜槽 | ||
| Straight Slots 直槽 | ||||
订货范例Order Example for standard version:
SPGO100*93*6
Product Dimension table based on Metric Size
公制产品尺寸（mm）
SPGO100*93*6
Product Dimension table based on Metric Size
公制产品尺寸（mm）
| D | d | h | O型圈线径d1 |
| 7~55 | D-2 | 2 | 1.8 |
| 80~200 | D-7 | 6 | 5.3 |
| 80~200 | D-9.8 | 7.9 | 7 |
| 100~200 | D-10 | 9.5 | 8.6 |
网站客服
