◎ 型号含义 Type meaning

① 1 路 One channel

② 控制电压 3-32VDC Control voltage 3-32VDC

③ 直流控直流 DC-DC (DC input-DC output)

④ 负载电压 5-220VDC Load voltage 5-220VDC

⑤ 10A, 20A, 25A, 30A, 40A, 50A, 60A, 75A, 80A, 90A,100A

◎ 产品概述 Product overview

◆ 直流固态继电器易并联，适合大电流应用场合

◆ 额定电流：10A-100Amps

◆ 额定电压：5-220VDC

◆ 控制电流：≤ 40mA

◆ 低输出断态漏电流

◆ 低阻抗 MOSFET 输出，限度减少总功耗

◆ 适合阻性负载和感性负载 ( 感性负载如电机和 EMR/ 电磁线圈等必须加装抑制二极管 )

◆ 具有 LED 灯输出指示

◆ 包含标准输出的 R-C 缓冲器

◆ 透明保护盖为用户提供额外保护

◆ DC solid state relays are easy to connect in arallel, suitable for high current applications

◆ Rated current: 10A-100Amps

◆ Rated voltage: 5-220VDC

◆ Control current: ≤ 40mA

◆ Low output off-state leakage current

◆ Low-impedance MOSFET as the output component minimize the total power consumption

◆ Suitable for resistive load and inductive load

(the inductive load, such as motor and EMR /

electromagnetic coil, must be equipped with the

suppressor diode)

◆ Display output status via LED

◆ Standard output R-C buffer

◆ Transparent cover for extra protectio

注意 :

1. 当负载电流为 10A 时 , 必须加装散热器 ; 为 40A 及以上时 , 必须加风扇强冷或水冷 .

2. 使用感性负载时 , 务必在输出端并接一个压敏电阻 , 取值为负载电压的 1.6-1.9 倍 .

Notice:

1. If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.

2. When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.

◎ 安装尺寸及接线图 Installation dimensions and wiring diagram

注：特殊电压可定做。Note: Specific voltage can be customized.