Three Phase Enclosed
Baldor's extensive line of General Purpose three phase motors are available in totally enclosed cast iron and industrial steel bａnd for harsh applications. Designed for "general purpose" use means that these motors can be used in many applications. The Super E Motors (EM & CEM) provide NEMA Premium efficiency and are designed as standard to be inverter ready with wide variable torque speed ranges.
Three Phase Open
Common Features:
• Open Drip Proof
• 3600 RPM (2-Pole)
• 1.15 Service Factor at 40°C Ambient
• NEMA Class “F” Insulation with NEMA Class “B” temperature rise
• High Effi ciency Designs
• NEMA Locked Rotor kVA Code “G”
• Rated for Across the Line Start
• Motors designed to meet or exceed NEMA Standard Vibration Levels
NEMA Class “F” Insulation with NEMA Class “B” temperature rise NEMA Class “F” Insulation with NEMA Class “B” temperature rise
Low Voltage Features:
• 150 thru 600HP
• 460V, 60HZ
• 404 thru 505 Frame
• NEMA Premium Effi cient up to 500HP
Meets NEMA Table 12-12
• NEMA TS Shaft
• Wye-Delta Connection
• NEMA “B” Torque Values
• Inverter Ready
Medium Voltage Features:
• 400 thru 1000HP
• 2300/4160V, 60HZ
• 5008 thru 5810 Frame
• High Effi ciency Designs
• (S) Type Shaft for Coupled Duty Loads
• Torque Values Exceeding Industry Standards
– Starting Torque of 99% or greater
– Pull Up Torque of 80% or greater
– Break Down Torque of 250% or greater
• Provisions for Vibration Detection
Single Phase Enclosed
Baldor's offers an extensive line of General Purpose single phase enclosed motors. In applications where only single phase power is utilized, these motors are available from 1/12 Hp through 15 Hp in TEFC designs. Standard foot mounted configurations are available, as well as C-Face foot mounted and C-Face footless. These are also offered in 1/4 Hp through 5 Hp as Super-E® Premium Efficient motors where energy savings is desired.
Single Phase Open
Baldor's offers an extensive line of General Purpose single phase open motors. In applications where only single phase power is utilized, these motors are available from 1/12 Hp through 10 Hp in ODP designs. Standard foot mounted configurations are available, as well as C-Face foot mounted and C-Face footless. These are also offered in 1/4 Hp through 5 Hp as Super-E® Premium Efficient motors where energy savings is desired.
General Severe Duty Motors
Baldor's extensive line of Severe Duty motors are designed to provide exceptional performance and long life in harsh industrial processing applications. These premium construction motors include features desiged to protect against contamination, moisture, vibration and demanding duty cycles. Super-E electrical designs are available on Severe Duty motors to create a packaged solution that reduces energy consuption and handles the punishment of the application.
IEEE 841 Motors
Baldor's line of 841XL motors are designed to meet and exceed the requirments of IEEE Std. 841. This Industry standard created for the Petrolium and Chemical Indusrty to improve the reliability, efficiency and performance of Severe Duty motors used in those applications. Other severe process industries like Forest Products have also adopted using the IEEE 841 spec as it helps promote uniform motor specification and reduce total cost of ownership.
Quarry Duty - Design C
Baldor•Reliance Quarry Duty motors are designed for Conveyors, gear reducers and other applications requiring NEMA Design C torques.
Crusher Duty Motors
Baldor•Reliance Crusher Duty motors are designed for Belt-driven rock crushers, pellet mills, and other applications requiring motors rated for severe duty service and high starting torques.
• Horsepower range: 5 to 400 HP
• Frame range: 180T – L449T
• Base speed: 900, 1200 and 1800 RPM
• Efficiency: NEMA Premium® per table (12-12)
Oil Well Pump - Design D
Baldor•Reliance Oil Well Pump motors are designed for use on beam pumping units, punch presses and applications requiring high torque and high slip.
Dirty Duty® Plus
Baldor·Reliance Dirty Duty motors are designed for use where additional protection is required against wet and washdown environments, corrosive environments and marine applications.
RPM XE eXtreme Efficient Motors
Building on the RPM AC platform, comes the next break thru in energy savings and performance available for across the line operation. The RPM XE platform boasts the high performance features of the RPM AC design with increased energy savings of up to four levels above NEMA Premium® efficiency. Available in both a power dense and standard NEMA design which offers drop-in replacement capabilities of today’s standard induction motor.
网站客服
