制电子(拉力)试验机(门式型)电话:
试验机满足:GB/T16491-2008、JJF1103-2003及JJG139-1999;亦能满足:GB、ISO、ASTM、JIS等标准中对各类材料的测试要求。可测量各种材料的抗拉强度、延伸率、弹性模量、抗压强度等力学性能,并对实验数据进行统计和判断,输出实验报告及特性曲线。
l吸收国际试验机控制技术,实现等速位移、等速试验力、等速应变三闭环控制模式,控制性能优良,精度高,抗力强,稳定性好。
l采用进口传感器、进口全数字交流伺服电机及驱动器、无间隙滚珠丝杠,部件加工均采用加工中心,门式结构,确保整机高刚度、高同轴度。
l高集成化控制软件,内含多个试验标准,适用于各行业对相应材料力学试验要求。
Type&spec.
WDW-1/2/5/10
WDW-20
WDW-50
WDW-100
WDW-200/300
WDW-500/600
试验力 (KN)
Max. load (KN)
10
20
50
100
200/300
500/600
有效测量范围
Effective measuring range
0.4%-FS
试验力分辨率Resolution of testing value
1/±300000
示值精度
Precision of indicating value
±0.5%
±0.5% (optional)
拉伸距离 (mm)
Max.tensile distance (mm)
800 (或按要求)
800 or can be made as required
压盘间距离 (mm)
Max. space between upper and lower platens (mm)
700或按要求
700 or can be made as required
控制模式Control mode
微机,位移、应力、应变三闭环控制Computer,three closed loop control of displacement, stress, and strain
三闭环控制调节范围及精度Range and accuracy of three closed-loop control
力控速率调节范围Adjusting range of load control:0.005%-5%FS/S
力控速率控制精度Adjusting range of control rate of load: 速率 <0.05%FS时,为±1%设定值以内;When rate<0.05%fs/s, the precision is within ±1% of setting value;
速率 ≥0.05%FS时,为±0.5%设定值以内;When rate ≥0.05%FS/s, the precision is within ±0.5% of setting value;
变形速率调节范围Adjusting range of deformation rate:0.005~5%FS/s:0.005~5%FS/s;
变形速率控制精度Control precision of deformation rate:速率<0.05%FS/s时,为设定值的±1%以内;When rate<0.05%fs/s, the precision is within ±1% of setting value;
速率≥0.05%FS/s时,为设定值的±0.5%以内;When rate≥0.05%FS/s, the precision is within ±2% of setting value;
位移速率调节范围Adjusting range of displacement rate: 0.005~500mm/min;
位移速率控制精度Control precision of displacement rate:为设定值的±0.2%以内;Within ±0.2% of the set value
附具配置 Accessory
拉伸、压缩、弯曲、剪切、剥离、撕裂等标准或特殊夹具可选择An option of standard accessories for tension,compression,bending or special grips
电源电压Voltage
~220V±10% 50Hz;
~380V±10% 50Hz;
主机外型尺寸(长宽高)Dimension of the main machine(L*W*H)mm
660×415×1500
740×450×1600
755×520×1780
850×555×1900
1050×750×2600mm
1260×1150×2560mm