乐清赢阳防爆电器有限公司

防爆配电箱 防爆控制箱 防爆操作柱 防爆插座箱

百分零部件网收藏该商铺

您所在位置:
乐清赢阳防爆电器有限公司>>防爆配电器>> BXX供应赢阳防爆动力检修箱,*,可以定做
 QQ交谈
产品展示

BXX供应赢阳防爆动力检修箱,*,可以定做

  • 公司名称:
  • 更新时间:
  • 所 在 地:
  • 生产地址:
  • 浏览次数:
  • 乐清赢阳防爆电器有限公司
  • 2017-04-26 03:40:00
  • 温州市
  • 乐清
  • 428

我要询价

【简单介绍】

供应赢阳防爆配电箱可以定做,*质量保证
乐清市赢阳防爆电器有限公司是防爆配电箱、防爆照明配电箱、防爆动力配电箱、不锈钢防爆配电箱、防爆配电柜、防爆控制柜、防爆防腐控制箱、防爆控制箱、防爆变频器、防爆电缆盘、防爆操作柱、防爆插座箱、防爆操作箱、防爆软起动器、防爆声光报警器、防爆灯等一些列防爆产品专业生产加工的有限责任公司,所有产品均严格按照国家相关标准设计和制造,并以设计轻巧,造型美观、检修

【详细说明】

赢阳防爆BXX动力检修箱

一、适用范围:

1、爆炸性气体混合物危险场所:1区、2区。
2、爆炸性气体混合物:ⅡA、ⅡB、ⅡC。
3、温度组别:T1~T6

4、防爆标志:ExdeⅡBT4、*ExdeⅡCT4。
注:要求ⅡC级请注明。

一、产品特点:

1、铝合金外壳,表面喷塑。
2、有多种规格的插座便于检修用电源。
3、可带有总开关,具有过载,短路等保护功能。

三、主要技术参数

回路数

额定电压(V)

支路电流(A)

防爆标志

极数

2、3、4、6

380/220

15、30

Exde Ⅱ BT4
* Exde Ⅱ CT4

1P+N+PE
3P+N+PE

四、主要外形尺寸及安装形式:

五:型号含义:

安装、使用与维修

安装前应检查本产品铭牌上所列基本数据是否与实际使用条件相符

产品应可靠接地

无论何种接线须将引入装置密封圈压。

维修时必须切断前级电源后开盖

引入装置密封圈和橡胶垫均采用耐油橡胶3001制造,用户在使用、

维修过程中若发现老化应与制造厂定购,并及时更换以确保防

爆性能

在隔爆面上均匀涂以204-1防锈油脂后在投入使用

﹒海拔不超过2000m

﹒周围环境温度为-20~+400C

﹒周围空气相对湿度不大于95%

﹒在无显著摇动和冲出振动的地方

﹒污染等级为3级

﹒无破坏金属和绝缘的腐蚀性气体或蒸汽的地方

﹒与垂直面的安装角度不超过15度

 

□Installation usage, maintenance.

Check the data before install it.

Product should be link to ground.

Cable should pressurized in to airproof quoit.

cut off power before maintenance.

In-build System and the rubber circle are made of oil-proof 3001, you

should contact our factory if the airproof quoit is damaged.

Mop up 204-4 antirust grease before use it.

﹒The altitude is not over2000m

The environment temperature is-20~+400C

The relative humidity of the air around the equipment is not over95%

No distinct shaking,concussion and libration

The pollution grade is 3

No corrosive gas and steam which can destroy the insulation of the metal

The install angle(to the vertical surface)is not over 150

产品特点

铸铝合金外壳,表面喷塑。

﹒插销与开关制成联锁机构,只有开关断开后方能拔出插头。

﹒适用于额定电压380V或220V、额定电流16A、32A的线路中,作

 为连接手持工具及照明灯电源。铸铝合金外壳,表面喷塑。插座上

 带有分、合指示。插头的接地触头比主触头长,使主触头未接通前

 先将地线接通。在拔脱插头时,zui后分断接地线,以保证安全。插

 销与开关制成联锁结构,当插头插入后,插头上的转套向右旋转至

 一定角度。插座内的开关即闭合,同时插销不能拔脱。反之,将转

 套向左旋转一定的角度,则开关分断,然后才能拔掉插头。插座上

设有防护盖,在插头拔脱后,防护盖将插座遮蔽,以免外物侵入。

 铜管或电缆布线,电缆布线须配有电缆夹紧密封接头。本产品符合

 国家GB3836.1.2.3-2000标准设计要求。

可带有总开关,具有过载,短路检修等保护功能。并可根据要求带

电保护功能。
 □Features
The shell is made of diecasted A1-alloy with plastic-sprayed surface.

The plug together with switch is constructed to form interlocks.Only if

  switch is off,the plug can be drawn out.

Suitable for ateel pipe and cable wiring.

Suitable to connecting portable electrical tool or power source of lighting

  fixture in thos circuits with rated voltage of 380V or 220V and rated

  current of 16A,32A Enclosure is made of casting aluminum alloy,surface is

  sprayed with plastics.With indicater of ON/OFF Earth pin is longer than

  main pin,so,before power on,the earth pin is effected.Pulling out pin,

  the earth pin only could bedisconnected after main pin discontented So the

  plug and socket could be functioned safety.The plug and socket is

  interlocked with switch.when insert plug into socket and right hand rotate

  sleeve arounding plug to certain angle the switch is on and the plug could

  not pullout,if left hand or rotate the sleeve,after the switch is off,the

  plug could be pull out.With guarding cover,After plug pulled out,the cover


 

    
留言框
感兴趣的产品: *
留言内容:
您的姓名: *
您的单位:
联系电话: *
微信:
常用邮箱:
详细地址:
省份: *
验证码: * =   请输入计算结果(填写阿拉伯数字),如:三加四=7
是否接受其他厂商报价: *
      

相关产品

产品搜索

请输入产品关键字:

联系方式
地址:乐清柳市苏吕工业区
邮编:325600
联系人:刘丽
留言:在线留言
商铺:https://www.100lbj.com/st23388/
| 商铺首页 | 公司档案 | 产品展示 |公司动态 | 询价留言 | 联系我们 | 会员管理 |
百分零部件网 设计制作,未经允许翻录必究.Copyright(C) https://www.100lbj.com, All rights reserved.
以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,百分零部件网对此不承担任何保证责任。
温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。
二维码

扫一扫访问手机站