玻璃钢防腐风机 返回列表页

• 01 CRC质量管理体系认证

  风机测试符合JB/T 10563-2006国家标准的要求，风机设备连续运行24小时不损坏，长久使用寿命，节能高效（省电），为您创造利润，节省成本。全机组进行电脑应力应变分析，提高结构强度。

• 02 保养操作简单

  采用紧凑的叶轮设计结构满足风机的高转速运行。叶片设计风量大，延长使用寿命，降低故障频率，模组化生产，规格统一，零配件材料齐全，可在短时间内、节约成本，快速完成安装维修。

• 03 提供服务团队

  1对1服务，提供到公司测量性能、震动，提供测试报告，防范故障于未然，保障风机在状况下运转。可针对客户的特殊规格，量身定制设计，确保风机运转于率点。

• HGF4-72型A式玻璃钢离心通风机

  HGF4-72型玻璃钢离心通风机是我司在原 4-72型风机基础上设计改良的一款高效率、高性能、低耗能环保风机。此机型外形更加适合气体流动性能，其尺寸能与风管较好地配套。 HGF4-72系列玻璃钢离心风机是参照金属 4-72型通风机性能参数基础上设计改良而采用进口乙烯聚氨脂复合材质制作而成。该系列风机可输送含酸碱成分及化学成分的腐蚀性气体，所输送气体不允许含有粘性物质、所含粉尘及硬质颗粒≤150mg/m³、气体温度≤80℃、相对湿度≤100％。该系列风机具有强度高、重量轻、不易老化、耐腐蚀性能良好、噪音低、运转平稳等特点，是一种高效率、高性能、低耗能、通用型防腐风机。该系列风机广泛应用于化工、电镀、氧化、发电厂、化验室、线路板、环保设备等含有腐蚀性气体的场所。

• HGF4-72 type Glass FRP centrifugal fan

  HGF4-72 series glass FRP centrifugal fan is a high efficiency, high performance and high energy saving fan designed by our company on the basis of the original 4-72 type fan. The shape of the model is more suitable for gas flow performance, and its size can be matched well with the wind pipe.The HGF4-72 series FRP centrifugal fan is designed and improved based on the performance parameters of the 4-72 metal fan, and is made of vinyl resin composite material. The series of fans can transport the corrosive gases of the caomponents of acid and alkali and chemical components. The gas is not allowed to contain viscous substances, dust and hard particles is less than or equal to 150mq/m3, the gas temperature are less than 60, the relative humidity is less than 99%. This series of fans have the characteristics of high strength light weight, not easy to aging, good corrosion resistance, low noise and smooth operation. It is a versatile anti-corrosion fan with high efficiency, high performance and low energy consumption. This series of fans are widely used in chemical, electroplating, oxidation, power plants, laboratory, circuit board environmental protection equipment and other corrosive gases.

外形及安装尺寸示意图 Lnstallation size diagram

产品为人工实物测量会有一定误差，相关数据仅作参考，以收到的实物为准。 单位Unit: mm(毫米）