通用防腐风机 返回列表页

• 01 CRC质量管理体系认证

  风机测试符合JB/T 10563-2006国家标准的要求，风机设备连续运行24小时不损坏，长久使用寿命，节能高效（省电），为您创造利润，节省成本。全机组进行电脑应力应变分析，提高结构强度。

• 02 保养操作简单

  采用紧凑的叶轮设计结构满足风机的高转速运行。叶片设计风量大，延长使用寿命，降低故障频率，模组化生产，规格统一，零配件材料齐全，可在短时间内、节约成本，快速完成安装维修。

• 03 提供服务团队

  1对1服务，提供到公司测量性能、震动，提供测试报告，防范故障于未然，保障风机在状况下运转。可针对客户的特殊规格，量身定制设计，确保风机运转于率点。

• WT4-72型中高压防腐通风机

  WT4-72型中高压防腐通风机是我司自主研发的一款高效率、高性能、低耗能环保风机。风机蜗壳和风轮采用模压一体成型，进出风都采用标准圆形接口（160、200、250、300）非常方便接标准的塑料管道。该系列风机为圆形接口单进风离心风机，采用后倾离心风轮与电机直连，客户可以根据自身需要调整出风口的角度。该系列风机具有强度高、效率高、能耗低、噪音低、重量轻、风量风压大、不易老化、运转平稳、耐腐蚀性能良好、便于安装等特点。用于输送或排放腐蚀性和高湿度的烟气、雾汽或化工酸碱异味气体。所输送气体不允许含有粘性物质、所含粉尘及硬质颗粒≤150mg/m³、气体温度≤60℃、相对湿度≤100％。

• WT4-72 medium pressure anti-corrosion fan

  WT4-72 series medium and high pressure anticorrosive fan is a high efficiency, high performance, low energy consumption environmental protection fan independently developed by our company. The fan volute and the wind wheel are integrally molded, and the inlet and outlet winds are all equipped with standard circular interfaces (160, 200, 250, 300), making it easy to connect to standard plastic pipes. This series of fans are single-inlet centrifugal fans with a circular interface, which adopts a backward tilting centrifugal wheel directly connected to the motor. Customers can adjust the angle of the air outlet according to their needs. This series of fans have the characteristics of high strength, high efficiency, low energy consumption, low noise, light weight, large air volume and pressure, not easy to age, stable operation, good corrosion resistance, and easy installation. Used to transport or discharge corrosive and high humidity fumes, mist vapors or chemical acid-base offensive odor gases. The transported gas must not contain viscous substances, dust and hard particles ≤150mg/m³, gas temperature ≤60°C, and relative humidity ≤99%.

外形及安装尺寸示意图 Lnstallation size diagram

宝贝为人工实物测量会有一定误差，以收到的宝贝为准。 单位Unit: mm(毫米）