pg1000c
- (1h-10m,脉冲发生器，晶体频率精度±100ppm，输出10vp-p,脉宽100ns-1s)
-
features and usage
1. the pulse signal generator - maximum pulse output voltage can reach +5v(50ω load). its repeated frequency range is se-lected by the internal oscillator frequency (1mhz-10mhz) and crystal oscillator frequency (10mhz). (1hz-10mhz to choose int mode, 10hz-10mhz to choose x-tal mode)
2. at x-tal mode, using the knob, by the 7 pre-set frequency range, you can set a frequency accuray. at the int mode, you can set a stochastic repeated frequency.
3. it can generate a pulse wave of high quality (1hz-10mhz),thus it has a very wide application in all kinds of circuit test. in the analyzing and design of a digital circuit, it can be used as a clock pulse source.
specifications
1.oscillator mode
int mode
ext. mode: +(up) , -(down)
crystal oscillator mode: x-tal
single oscillator mode: manu
2.oscillator frequency
int: 1hz-10mhz / 1-7 ranges (freq. changes at each range)
x-tal: 10,100,1k,1m,10m(hz) (frequency stability: ?00ppm)
3.external input
max.input voltage : -1v, +10v
input voltage: ≥+1v
pulse width: ≥20ns
frequency width: 10hz-10mhz
4.single oscillator mode input method: press the switch 5.pulse output output voltage: 0 ~ +5v adjustable (50ω load) 0 ~ +10v adjustable (open status) rising time : <10ns (50ω load，+2.5v -- +5v) falling time : <10ns (50ω load，+2.5v -- +5v) period int : 100ns-1000ms/ 1-7 ranges (freq. changes at each range) x-tal : 100ns-100ms /1-7 ranges (freq. fixed) delay time : 0-50ms/1-7 ranges (freq. changes at each range) pulse width : 50ns-50ms /1-7ranges ( freq.changes at each range) 6.trigger output output method: c-mos (74hco2)(50ω load, ≥1v)
- (1h-10m,脉冲发生器，晶体频率精度±100ppm，输出10vp-p,脉宽100ns-1s)
