上海塑佳机械设备有限公司
上海塑佳机械设备有限公司
CD系列箱型干燥机适用于所有各类的聚合物材料烘干,并能同时烘干不同的材料,非常适合用于少量,多样性的原料或试模时使用.也可用于电子,电机,电镀,烤漆,印刷相关产品之预热或干燥处理.
CD系列箱型干燥机适用于所有各类的聚合物材料烘干,并能同时烘干不同的材料,非常适合用于少量,多样性的原料或试模时使用.也可用于电子,电机,电镀,烤漆,印刷相关产品之预热或干燥处理.
CD series of cabinet dryers mostly used for simultaneous drying of different kinds of polymers in small quantities or for drying mate rials for trial molding,They can also be applied in electronic engineering,electroplating,pharmacy,paintbaking,printing industries,etc,for preheating or drying related products.
| 本机特点 Features | ||||||
| 采用精密P.I.D电子温度控制,达到均匀的烘干效果. | ||||||
| 高温密封门可保持一致的温度并降低热量损耗. | ||||||
| 不锈钢材质的烤盘及内衬,阿防止在烘干过程中污染原料. | ||||||
| 入风口,排风口均可调试设计 ,可方便调节风量. | ||||||
| 24小时定时装置,操作方便. | ||||||
| 配备超温保护器,可避免超温干燥. | ||||||
| 配备马达过载保护. | ||||||
| 配备警报灯,可立即反应故障. | ||||||
| 干燥温度超出设定偏差值时,自动切断发热丝电源,保护发热丝. | ||||||
| Accurate P.I.D temperature control to achieve even drying effect. | ||||||
| Air-proofed in sulated door can maintain temperature constantly in side to reduce energy consum ption. | ||||||
| Stainless steeltray and liner bring no contamination to materials. | ||||||
| Unique design of adjustable air inlet and exhaust. | ||||||
| 24hours timer,easy to operate. | ||||||
| Overhe at prote ctor can prevent excessive drying. | ||||||
| Motor overload relay. | ||||||
| Visible alarm to indicate troubles immdeiately. | ||||||
| Power would be autom atically cut off when drying temerature exceeds set deviation value to protect thermal fuse | ||||||
| 工作原理 Working Principle | |||||
| 箱型干燥机中，有可移动的盘子，将需要烘干的原料放在盘子内，运行时风车迫使空气通过发热丝，再通过风板均匀吹进原料，当原料均匀烘干后，潮湿的空气由排风口从另一面排出。 | |||||
| For cabinet dryers,materials to be dride are placed on the stainless steel made moveable trays,During operation,process air will flow to heating wire and be heated up to required temperature,then plow through a manifold with evenly scattered holes ,Moisture air is sent out through air exhaust port,It is designed to achieve an even drying effect. | |||||
| 机型规格 Specifications | ||||||||
| 型号Model | 电热功率(KW)heater | 马达功率(KW)Blower | **干燥温度(℃)Highest Temp | 盘架数Tray Quantity | 装料量(kg)Total Capavity | 外部尺寸H*W*D(mm)Quter Dimension | 内部尺寸H1*W1*D1(mm)inner Dimension | 重量(kg)Net Weight |
| CD-5 | 4 | 0.37 | 200 | 5 | 50 | 1200*800*610 | 660*600*550 | 147 |
| CD-9 | 4.5 | 0.37 | 200 | 9 | 90 | 1440*800*610 | 900*600*550 | 178 |
| CD-20 | 9 | 1.5 | 200 | 20 | 200 | 1700*1210*860 | 1000*990*800 | 415 |
| CD-20L | 18 | 1.5 | 200 | 20 | 450 | 1865*1800*1060 | 1200*1600*1000 | 550 |
| 注:1)以上装料量是以堆积密度为0.65kg/L,直径为3-5mm塑胶原料颗粒为标准. | Note:1)Above loading capacity is based on pellet material of 0.65kg/L in bulk density and 3-5mm in diameter. | |||||||
| 2)机器电压规格为:3φ,380VAC ,50Hz | 23)Power:3φ,380VAC ,50Hz | |||||||
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
百分零部件网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
