深圳市中天华威电子有限公司
深圳市中天华威电子有限公司
1.Supports HiSilicon Fast Charging Protocol (FCP).2.Supports Qualcomm?Quick ChargeTM 2.0/3.0 Class A : 3.6V up to 12V Output Voltage.3.Automatically Selects FCP and QC2.0/3.0 Protocols.4.Supports USB DCP Shorting D+ Line to D? Line per USB Battery Charging Specification, Revision 1.2.5.Complies with Chinese Telecommunication Industry Standard YD/T 1591-2009.6.Supports USB DCP Applying 2.7V on D+ Lineａnd 2.7V on D? Line.
产品参数
管脚封装：
| IC管脚示意图 | 管脚号 | 管脚名称 | 描述 |
| | 1 | D+ | USB D+ data line. Recommended this pin connect without resistors(open) or with a resistor higher than 1MΩ connect to GND |
| 2 | GND | Ground pin | |
| 3 | FBO | Feedback output pin. Current sink/source FB node | |
| 4 | QC_EN | QC_enable: QC2.0/3.0 and FCP function are enabled by either logic high or high-Z. Contrarily, QC2.0/3.0 and FCP function are disabled by logic low | |
| 5 | VDD | Power supply input pin | |
| 6 | D- | USB D? data line | |
| | | |
订购信息：
| 定购型号 | 封装 | 包装形式 | 丝印 |
| FP6601QS6 | SOT23-6 | 盘装 3000颗/盘 | FP6601QS6 |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
百分零部件网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
