GW-008 DIN耐磨试验机 GW-008 DIN abrasion resistance testing machine 仪器简介: 该仪器主要用于橡胶或塑胶大底的耐磨性测定,橡胶或塑胶大底必须通过用规定号数的砂纸与之磨擦,做为判定鞋底材料的耐磨耗性能。具体应用:用DIN耐磨试验机中的60号砂纸、标准胶、标准荷重(10N)、标准转数、材质密度、磨耗量等检测材料的磨耗值,以立方毫米(mm3)为单位。 The determination of the abrasion of elastomers, rubber, soft synthetics, leather and materials is of special importance for the classification of the resistance to abrasive wear. It’s with characters of high efficiency good reproducibility and easy operation. 符合标准:GB/T20991-2007 8.3 (GB/T9867)ISO EN 20344:2004;DIN53516等标准。 Standard for:SATRA TM 174; GB/T20991-2007 8.3 (GB/T9867)ISO EN 20344:2004;DIN53516 技术规格: 1.滚轮总长度:460mm 2.荷重:10N。 3. 砂纸粒度:60# 4. 有效行程:40m 5. 电压:AC220V 6. 体积:80*40*35cm 7.重量:61kg 随机配置: 1.小型台钻1台 2. 标准取样刀模1个 3.标准砂纸2张 4. 标准耐磨胶5个 5.打磨砂纸用铝丁2粒 6. 小毛刷1把 Technical specifications: Roller length: 460mm Load weight:2.5,5N Sandpaper grits:60# Wear trip:40m Voltage:AC220V Dimension:80*40*35cm N.W.:61kg Attached accessories: 1pc small drilling machine 1pc standard die mould 2pcs standard sandpapers Do this test need cooperate balance ,customer buy by themself.