产品概述 潜水排污泵系列是我公司引进技术的基础上．结合国内水泵的使用特点而研制成功的新一代泵类产品．具有节能、防缠绕、无堵塞、自动安装和自动控制等特点。在排送固体颗粒和长纤维垃圾方面．具有效果。 该系列泵采用叶轮结构和新型机械密封．能有效地输送含有固体物和长纤维。叶轮与传统叶轮相比，该泵叶轮采用单流道或双流道形式．它类似于一截面大小相同的弯管．具有非常好的过流性．配以合理的蜗室．使得该泵具有效率高、叶轮经动静平衡试验．使泵在运行中稳定可靠。 该系列泵水力性能、高效。结构多样．安装方式多样．简化泵站．节约投资。 该系列水泵依据JB/T5118-2001标准制造。 | GENERAL OF THE PRODUCT The sewage pump series is a new generation product successfully developed in this Co. on the basis of the introduced foreign advanced know-how and the features of use of the domestic water pumps and features a no-table energy-saving effect, wrapping-proof, non-block, auto installation and control, and an unique effect on the drainage of solid grains and long fiber rubbish. This series pump uses an unique impeller structure and a new-style mechanical seal and can effectively transport those media containing solids and long fibers. Compared with the conventional impeller, the impeller with this pump uses a form of single or dual flow-path, similar to an elbow of the same section and of an extremely good flow-through performance, and, fitted with a reasonable turbine room, this pump cam work very effectively and, via the dynamic and static balancing test on the impeller, run stably and reliably. This series pump holds an advanced hydraulic performance, high efficiency, multiple structures and installation modes, simplifying the pump station and saving the investment. This water pump is made according to JB/5118-2001. | 使用条件 ●介质温度不超过60℃，重度1.0～1.3Kg/dm³．PH值在5～9范围内。 ●无内自流循环冷却系统的泵．电机部分露出液面不超过1/3。 ●一般情况下．泵必须在使用扬程范围内使用．保证电机不过载．如需在全扬程范围使用．应在订货时另行注明，以便厂家制造。 ●在运行过程中泵电机电流不得超过电机的额定电流。 CONDITIONS FOR USE ●Medium temperature not over 60℃, weight density 1.0-1.3Kg/dm³, PH value within 5-9. ●Pump of a circulated cooling system without internal self-flow, the portion out of the liquid surface of the motor not over 1/3. ●The pump has to be used within the range of the head for use, in general, to make sure of the motor without overloaded. Please make a note at order if desired to use in the full head range so as for the manufacturer to make. ●The current of the pump's motor should not be over the rated current of the motor in running. |
